Other parts
You are here: Home » Products » Other parts

CATEGORIES

FLASH NEWS

CONTACT US

Other parts

  • Scraper type fully automatic dust removal and scum cutting platform
    The cutting platform is assembled into a complete cutting platform through the mode combination process. Each area is equipped with a systematic control wind door opening and closing mechanism. The wind door follows the position where the torch is located. The cutting smoke in the inside is adsorbed into the dust collector, and the clean air flow after filtering is discharged into the atmosphere. Plasma cutting scum and corner small pieces dropped at the bottom through grid. The ring chain was driven by a motor. The ring was operated. In the end waste fighting of the cutting platform.
  • Full automatic coding device
    The fully automatic coding device is dedicated to metal plates and pipeline logos. The use of special ink is used. Whether it is a QR code, barcode, logo, handwriting, etc., there will be no fuzzy color loss. Is the DOD large character series spray? The device is relatively low in use, and it is not affected by the environmental impact of dust and high temperature caused by the environment. The long life is stable, and it is particularly suitable for the working environment of CNC cutting machines.
  • QKNEST CNC Cutting Machine Nesting Software

    Kunshan Qiankun has developed a special customized version of the kit based on market demand and partners, easy to operate, easy to master, andThe ERP system seamlessly docked, the functions are more human, meet different kit demands.

  • Built-in flame capacitor height controller
    In people's conventional knowledge, built-in height controllers are used for laser cutting machines and plasma cutting machines. This technical bottleneck limits the development of high-end flame machines.After more than a year of research and development and testing, just stepping into 2021, the built-in flame capacitor height controller of the Qiankun machine came out, and it was successfully used for the height control of the flame cutting gun.
  • Flame-cutting machine torch sprinklers
    Flame cutting will also produce dust and dust to the human body. As the state is getting higher and higher, the flame cutting machine also requires a model of smoke dust, after years of practice we found that the flame cutting smoke and dust soluble in water.
  • Powder Spraying and Marking Device
    The powder spraying and marking gun is an important functional part of the CNC cutting machine. Its function is to mark the process line, graphics and part number on the surface of the steel plate. The working principle is that high-mesh zinc powder is melted by high-temperature flame and sprayed on the surface of the steel plate to form uniform and clear lines of zinc powder, which have certain corrosion resistance and wear resistance.

Kunshan Qiankun Machinery Manufacturing Co., Ltd.

After more than ten years of continuous efforts, we have delivered more than one thousand sets of various cutting machines, which create value for customers all over the world. Every year, nearly half of the machines are exported to Southeast Asia and Europe.

SOCIAL ATTENTION

  +86512-81638771
111 Xinxing South Road, Kunshan Economic and Technological Development Zone, Suzhou City, Jiangsu Province