Scraper type fully automatic dust removal and scum cutting platform

The cutting platform is assembled into a complete cutting platform (2.7 meters wide X25.2 meters long) through the mode combination process. The specifications of the module are 2.1 meters X width and 2.7 meters. Internal configuration of a system instruction controlled wind door opening and closing institution. When the cutting torch of the cutting reaches different areas, the wind door mechanism in the corresponding area will open. Intelligent judgment opening or closing, the dust tract on both sides is connected to the external dust collector. When the dust removal is turned on, the dust -absorbing windshot is formed in the dust tract on both sides. In the middle, the clean air air flow was discharged into the atmosphere after filtering through the filter tube.

The cutting steel plate is placed on the grid plate, and the waste slag and corner small pieces of the plasma cut into the bottom steel plate at the bottom through the grid. The cutting platform is equipped with 4 full -length ring chains on both sides of the cutting platform. The ring chain is installed every 4 meters on the ring chain. The ring chain is driven by a motor. The corner small parts are pushed to the end of the cutting platform. Essence