Availability: | |
---|---|
After years of research, Qiankun’s technical team has launched a new generation of 3D bevel cutting system QHC-300QK/AC-3D PRO. It is made of high-strength wear-resistant aluminum alloy. It has two-way kinematic chain, and fully enclosed harmonic reducer and micro servo motor within.It can adapt to various harsh industrial conditions. It has higher precision and durability, and has a beautiful appearance.
Perfectly matched with QK-NC Plus EtherCAT CNC system, mainly used for oxyfuel 3D bevel cutting;
A/C axis control, can complete straight edge cutting, down bevel cutting, and up bevel cutting;
Cut V, Y, X bevel and other shapes;
Can realize cutting torch pre-swing cutting, right-angle direct bend cutting, and mouse ear sharp corner cutting;
The lifting distance of the high-precision lifting slide is up to 300mm.
Name | Types of | A axis | B axis |
Assembly location | the way | Horizontal installation | |
Size | mm | Width 76mm; height 200mm | |
Weight | KG | 21KG | |
Swing stroke | Limit rotation angle | ±50° | ±50° |
Spinning speed | Degree/sec | 90° | 90° |
Zero precision | —— | 1 arc minute | 1 arc minute |
Maximum bevel cutting angle | —— | ±45°(plasma cutting) | |
Bevel angle positioning accuracy | —— | 1 arc minute | 1 arc minute |
Rotating motor | —— | 400W/import | 400W/import |
Reducer | Brand | ALPHA custom/import | ALPHA custom/import |
Connection method | —— | Direct connection | Direct connection |
Motor parameters | —— | 1.3N/M | 1.3N/M |
name | Types of | A axis | C axis |
Assembly location | the way | Vertical installation | |
size | mm | Width 305; height 1205 | |
weight | KG | 45 (AC axis) | |
Swing stroke | Limit rotation angle | ±120° | ±360° |
spinning speed | Degree/sec | 0.5S from ﹢60°~-60° | 0~75rpm/min |
Zero precision | —— | Less than 5 arc minutes | Less than 5 arc minutes |
Maximum bevel cutting angle | —— | ±45°(plasma cutting); ±60°(flame cutting) | |
Rotation positioning accuracy | —— | Less than 0.2 degrees | Less than 0.2 degrees |
Rotating motor | —— | 400W/import | 750W/import |
Reducer | Neugart | GRN, 2-level deceleration | |
Connection method | —— | Direct connection | Direct connection |
Motor parameters | —— | 1.3N/M | 2.4N/M |
After years of research, Qiankun’s technical team has launched a new generation of 3D bevel cutting system QHC-300QK/AC-3D PRO. It is made of high-strength wear-resistant aluminum alloy. It has two-way kinematic chain, and fully enclosed harmonic reducer and micro servo motor within.It can adapt to various harsh industrial conditions. It has higher precision and durability, and has a beautiful appearance.
Perfectly matched with QK-NC Plus EtherCAT CNC system, mainly used for oxyfuel 3D bevel cutting;
A/C axis control, can complete straight edge cutting, down bevel cutting, and up bevel cutting;
Cut V, Y, X bevel and other shapes;
Can realize cutting torch pre-swing cutting, right-angle direct bend cutting, and mouse ear sharp corner cutting;
The lifting distance of the high-precision lifting slide is up to 300mm.
Name | Types of | A axis | B axis |
Assembly location | the way | Horizontal installation | |
Size | mm | Width 76mm; height 200mm | |
Weight | KG | 21KG | |
Swing stroke | Limit rotation angle | ±50° | ±50° |
Spinning speed | Degree/sec | 90° | 90° |
Zero precision | —— | 1 arc minute | 1 arc minute |
Maximum bevel cutting angle | —— | ±45°(plasma cutting) | |
Bevel angle positioning accuracy | —— | 1 arc minute | 1 arc minute |
Rotating motor | —— | 400W/import | 400W/import |
Reducer | Brand | ALPHA custom/import | ALPHA custom/import |
Connection method | —— | Direct connection | Direct connection |
Motor parameters | —— | 1.3N/M | 1.3N/M |
name | Types of | A axis | C axis |
Assembly location | the way | Vertical installation | |
size | mm | Width 305; height 1205 | |
weight | KG | 45 (AC axis) | |
Swing stroke | Limit rotation angle | ±120° | ±360° |
spinning speed | Degree/sec | 0.5S from ﹢60°~-60° | 0~75rpm/min |
Zero precision | —— | Less than 5 arc minutes | Less than 5 arc minutes |
Maximum bevel cutting angle | —— | ±45°(plasma cutting); ±60°(flame cutting) | |
Rotation positioning accuracy | —— | Less than 0.2 degrees | Less than 0.2 degrees |
Rotating motor | —— | 400W/import | 750W/import |
Reducer | Neugart | GRN, 2-level deceleration | |
Connection method | —— | Direct connection | Direct connection |
Motor parameters | —— | 1.3N/M | 2.4N/M |
Kunshan Qiankun Machinery Manufacturing Co., Ltd.
After more than ten years of continuous efforts, we have delivered more than one thousand sets of various cutting machines, which create value for customers all over the world. Every year, nearly half of the machines are exported to Southeast Asia and Europe.
SOCIAL ATTENTION
Copyright © 2021
Kunshan Qiankun Machinery Manufacturing Co., Ltd.
Partners:Leading foreign trade station
record number:Su ICP No. 2021003781