Views: 2 Author: Site Editor Publish Time: 2022-11-09 Origin: Site
Jiangsu plasma cutting machineWhat should I pay attention to when Introduce the plasma cutting machine?
Since the development of plasma laser cutting, it can adopt a work steam (the auto body during work is a dielectric quality of the plasma arc, but also the thermal body, and it must also clean the melting metal in the wound. Quality and rate are obviously harmful. Common plasma arcs work in steam, hydrogen, nitrogen, oxygen, gases, water vapor and some mixed gas. Plasma laser cutting is partially melted (and volatilized) at the metal material of the product workpiece to make the product workpiece wound, and the driving force of the fast plasma is cleaned up to produce a processing technology for generating wounds.
Plasma laser cutting cooperates with each other in different types of work capable of laser cutting into various oxygen cutting and cannot laser cut metal, especially for rare metals (stainless steel plates, aluminum, copper, titanium, nickel) laser cutting effect; The main feature depends on the laser cutting thin and relatively small metal, plasma laser cutting speed is faster, especially when laser cutting carbon structure steel metal plates, efficiency can reach 5-6 times of oxygen cutting method, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, smooth cutting surface, and smooth cutting surface. The heat expansion is small and there is basically no heat -influencing area! The sliding rails should be cleaned regularly, the smoke and dust such as smoke and dust should be scrubbed regularly, adding lubricating fat, and moisturizing without dirt. The sliding rail should be cleaned regularly and lubricating fat.
We must carry out safety inspection and maintenance frequently. If there is deformation or other shapes, at this moment ... It is already a bit damaged to understand that the laser cutting head is a bit damaged and need to be changed. No change will affect the laser cutting quality and improve cost fees. Many products may need to be used twice to reduce costs and efficiency. To find the manufacturer's production, you must check it carefully when you get the goods to prevent problems at that time.
Jiangsu plasma cutting machine: daily maintenance of plasma cutting machine
1. Consumption should be disassembled immediately before the bottom of the plasma cutting machine is destroyed
It does not need to be completely destroyed before disassembling, because the plasma cutting machine pole, nozzle, and vortex rings that are severely damaged by plasma cutting machines will cause non -controlled plasma arcs, which can easily cause severe damage to the torch. Because when the quality of optical fiber laser cutting is slowly found, it should be checked in time.
2. Clean the connection pipe thread of the torch
When disassembling or daily maintenance inspection, it is necessary to ensure the cleaning of the torch and British thread.
3. Check the gas and air conditioner daily
Check the liquidity and pressure of gas and air -conditioning daily. If the liquidity is seriously insufficient or leaked, the plasma cutting machine should be immediately standby.
4. Reasonable assembly cutting torch
Properly assembled the torch to ensure that all parts cooperate with each other, and ensure the circulation of gas and air -conditioner products. The assembly puts all the prefabricated components on the clean and tidy velvet cloth to avoid the stains from sticking to the prefabricated component.
5. Clean up the electric and nozzle surface
In many cutting torches, the nozzle and electrical surface surface are plug -in surfaces. If such surfaces are stains, the torch should not be able to work normally.
Jiangsu plasma cutting machine: It will be explained here today. If you need a plasma cutting machine, remember to consult our Jiangsu plasma cutting machine manufacturer.
Kunshan Qiankun Machinery Manufacturing Co., Ltd.
After more than ten years of continuous efforts, we have delivered more than one thousand sets of various cutting machines, which create value for customers all over the world. Every year, nearly half of the machines are exported to Southeast Asia and Europe.