The maintenance of the CNC sloped cutting machine?
Views: 0 Author: Site Editor Publish Time: 2022-07-21 Origin: Site
With the continuous progress of science and technology, all walks of life have also developed greatly, aboutCNC sloped cutting machineThe development prospects are also very good, so the demand has continued to increase, and many manufacturers have been added to the market. As a manufacturer, it is also necessary to tell you about its maintenance methods. The partner can take a look together.
Before we use the CNC sloped cutting machine, we need to know more about it. Moreover, if we want to better use it, we must also understand its related knowledge points. First of all, you must be clear that the degree of automation of the CNC sloping cutter is high, which can be fully closed, no pollution, and low noise, which greatly improves the operator's working environment. The operation of the cutting machine must be fixed (fixed, fixed machine, and job). Of course, the operator must undergo professional training and must be proficient in operation. Non -professional must not move. In addition, when maintaining the CNC sloped cutting machine, it is necessary to pay attention to the CNC ramp cutting machine before operation, and must be confirmed that there is no external interference. After everything is normal, at this time you can hang the cutting plate on the cutting platform, and the plate cannot exceed the cutting range (note: be careful when hanging).
CNC sloped cutting machineOn each working day, the dirt on the machine tool and guide rail must be cleaned, the machine tool must be cleaned, the gas source and power supply is turned off at get off work, and the remaining air in the machine tool tube is exhausted. What you need to know here is that if it leaves the machine for a long time, please turn off the power to prevent non -professional operations. And during maintenance, you need to pay attention to observe the horizontal and vertical rails and surface of the rack on the surface of the machine to maintain good lubrication. In the maintenance time of the CNC ramp, the thing that everyone needs to do is to completely clean the machine every week, clean the level and vertical guide rail, drive gear shift and gradia, and add lubricating oil. Then I suggest that you go to check the loosening of each part, clean up the tools to remain garbage, and keep the ignition normally. Our company actively promotes comprehensive quality management. The products produced here are actually mainly attracted a lot of customers because of their beautiful appearance and generosity. Of course, the craftsmanship here is rigorous and meticulous, reasonable and complete after -sales service. It has been well received by users from all over the world for many years.
The content of the above article is,CNC sloped cutting machineRelated introduction to maintenance measures, if you still need to know other information, please contact our company for consultation.
After more than ten years of continuous efforts, we have delivered more than one thousand sets of various cutting machines, which create value for customers all over the world. Every year, nearly half of the machines are exported to Southeast Asia and Europe.