Views: 0 Author: Site Editor Publish Time: 2022-10-13 Origin: Site
Plasma slope cutting machineAdopting high -precision limit control, the flame slopes have made new progress. The CNC system configured by the whole machine has high performance, high stability, and can achieve multi -tasking operations at the same time. No manual intervention is required to ensure that the cutting process is smooth and efficient, and the back of the slope database table can be completely called small and good vertical. Then, let's take a look at the use of the plasma sloper cutting machine.
The plasma sloper cutting machine is simple and no need to be programmed. The operator only needs to put the panels to the slopes of the panels to be cut on the workbench, use laser spots or mechanical positioning blocks for workpiece positioning, and automatically complete the cutting processing of the workpiece slopes. Essence
What are the problems needing to pay attention to using a plasma sloped cutting machine?
1. To confirm whether the steps and correction are correct before cutting.
2. Check whether the light tension is sufficient. When cutting the cone, reduce the tension to half of the usual usual.
3. Check whether the shreds are appropriate.
4. When the mobile workbench or the main axis, the movement speed is correctly selected according to the distance from the workpiece to prevent collision when the movement is too fast.
5. Pay attention to observation when cutting the knife, judge the stability of processing, and find that bad products are adjusted in time.
6. When programming, the correct processing process and processing pathway should be determined according to the actual situation to prevent the workpiece scrapped or premature cutting and falling due to insufficient processing location or insufficient edge strength.
7. Check whether the shot selection is reasonable. Use high -pressure jets during rough processing, and use low -pressure jets during fine processing.
8. Select open processing or close processing according to the actual situation of the workpiece, and try to shorten the distance between the nozzle and the workpiece to avoid interference. During close processing, the distance between the nozzle and the workpiece is short.
9. During the processing process, the cutting situation should be advanced forward.
How to use plasma sloped cutting machine
1. Use the torch roller to contact the workpiece, adjust the distance between the nozzle and the workpiece plane is 3 ~ 5mm. When cutting off the host, the "thickened " switch is high.
2. Open the torch switch, ignite the plasma arc, and move the cutting workpiece at full speed after the cutting workpiece. The cutting speed is based on cutting off, not fast or slow. Too late will affect the quality of the incision and cause a curved to break.
3. After cutting, turn off the torch switch, and the plasma arc is extinguished. After a few seconds, stop spraying automatically. Take off the torch and complete the whole process of cutting.
The above is the method and precautions of the plasma sloper cutting machine. If you need to learn more, you can contact us at any time! Our company has many years of experience and wait for you to join at any time.
Kunshan Qiankun Machinery Manufacturing Co., Ltd.
After more than ten years of continuous efforts, we have delivered more than one thousand sets of various cutting machines, which create value for customers all over the world. Every year, nearly half of the machines are exported to Southeast Asia and Europe.