How much do you know about the application of plasma flame cutting machines in industrial production?

Plasma flame cutting machine is a new type of cutting tool. It uses the principle of plasma to mix the oxygen in the air with a certain concentration of hydrogen to synthesize plasma, and then heat the plasma to high temperature to form plasma flames to achieve the cutting function. The plasma flame cutting machine has many advantages such as high degree of automation, high cutting accuracy, high cutting efficiency, high cutting efficiency, low energy consumption, simple operation, etc. It can realize plate cutting, precision cutting, and hard material cutting. It is an indispensable equipment in industrial production.

one,Plasma flame cutting machineWorking principle

The plasma flame cutting machine is cut with a plasma principle, mixed the oxygen in the air with a certain concentration of hydrogen to synthesize the plasma, and then heated the plasma to high temperature to form a plasma flame. Various metal materials, such as steel plates, aluminum plates, stainless steel plates, etc.

Second, the characteristics of plasma flame cutting machine

1. The degree of automation is high, and the fuel supply and air supply can be automatically adjusted as needed. Therefore, the operation is simple and reliable;

2. High cutting accuracy, the temperature of the plasma flame is as high as 3000 ° C, which can realize plate cutting, precision cutting, and hard material cutting;

3. High cutting efficiency, adopt a multi -ion cutting machine, can achieve multi -line cutting at the same time, greatly improving the cutting efficiency;

4. Low energy consumption, only air and fuel during cutting are needed during cutting, and there is no other consumption, so it can be low;

5. The operation is simple, and the plasma flame cutting machine is simple. It only needs to operate the operator according to the set parameter within the field of sight.

Third, the application field of flame cutting machine

Flame cutting machines are widely used in the production of aviation, aerospace, military, oil, chemical, machinery manufacturing, automotive, electronics, tanks, kitchen equipment, air -conditioning equipment, hardware products, patch machinery and other industrial fields.

Fourth, the maintenance of the flame cutting machine

1. Regular inspectionPlasma flame cutting machinePreparation, check whether the circuit is intact, and whether the cutting effect meets the expectations;

2. Make sure that the cutting operation is correct, the correct operation can extend the service life of the flame cutting machine;

3. Clean and cut sparks regularly to ensure the normal operation of the cutting machine;

4. Regularly replace the lubricant of the cutting flame cutting machine to prevent the cutting machine from being overheated and worn;

5. Replace the oxygen, hydrogen and other gases of the plasma flame cutting machine regularly to ensure the cutting effect of the flame cutting machine.

5. Precautions for the use of flame cutting machine

1. The flame cutting machine needs to perform a safety inspection before use. If the gas emission pipeline is complete, the control system is normal, and whether the explosion -proof equipment is intact;

2. It is forbidden to use the flame cutting machine to cut toxic and harmful substances, otherwise it may cause accidents;

3. When using a flame cutting machine, you need to wear protective equipment, such as gloves, goggles, etc.

4. Operate the flame cutting machine correctly, do not operate overload;

5. Before turning on the cutting machine, check the gas flow to ensure that the flame cutting effect is normal.