After years of research, Qiankun’s technical team has launched a new generation of 3D bevel cutting system QHC-300QK/AC-3D PRO. It is made of high-strength wear-resistant aluminum alloy. It has two-way kinematic chain, and fully enclosed harmonic reducer and micro servo motor within.It can adapt to various harsh industrial conditions. It has higher precision and durability, and has a beautiful appearance.
Perfectly matched with QK-NC Plus EtherCAT CNC system, mainly used for oxyfuel 3D bevel cutting;
A/C axis control, can complete straight edge cutting, down bevel cutting, and up bevel cutting;
Cut V, Y, X bevel and other shapes;
Can realize cutting torch pre-swing cutting, right-angle direct bend cutting, and mouse ear sharp corner cutting;
The lifting distance of the high-precision lifting slide is up to 300mm.
Name | Types of | A axis | B axis |
Assembly location | the way | Horizontal installation |
Size | mm | Width 76mm; height 200mm |
Weight | KG | 21KG |
Swing stroke | Limit rotation angle | ±50° | ±50° |
Spinning speed | Degree/sec | 90° | 90° |
Zero precision | —— | 1 arc minute | 1 arc minute |
Maximum bevel cutting angle | —— | ±45°(plasma cutting) |
Bevel angle positioning accuracy | —— | 1 arc minute | 1 arc minute |
Rotating motor | —— | 400W/import | 400W/import |
Reducer | Brand | ALPHA custom/import | ALPHA custom/import |
Connection method | —— | Direct connection | Direct connection |
Motor parameters | —— | 1.3N/M | 1.3N/M |
name | Types of | A axis | C axis |
Assembly location | the way | Vertical installation |
size | mm | Width 305; height 1205 |
weight | KG | 45 (AC axis) |
Swing stroke | Limit rotation angle | ±120° | ±360° |
spinning speed | Degree/sec | 0.5S from ﹢60°~-60° | 0~75rpm/min |
Zero precision | —— | Less than 5 arc minutes | Less than 5 arc minutes |
Maximum bevel cutting angle | —— | ±45°(plasma cutting); ±60°(flame cutting) |
Rotation positioning accuracy | —— | Less than 0.2 degrees | Less than 0.2 degrees |
Rotating motor | —— | 400W/import | 750W/import |
Reducer |
| Neugart | GRN, 2-level deceleration |
Connection method | —— | Direct connection | Direct connection |
Motor parameters | —— | 1.3N/M | 2.4N/M |